Training modality
- 100% virtual offline modality (asynchronous, without class schedules, access 24 hours a day, all year round)
Duration
7 months
185 academic hours
Start date
You choose when to start your first module
AVAILABLE IN ALL COUNTRIES
► Access the international specialization diploma in Underground and Surface Geomechanics.
► Receive the diploma in Underground and Surface Geomechanics.
► Get trained by a speaker with extensive experience on the subject.
► Receive materials for each module such as slides, manuals and data that you can keep.
► To be able to make all the necessary academic queries directly to the speaker.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access the network of professionals from the various countries of the world. Technicians, university students, engineers, masters, doctors (Ph.D.), postdoctoral researchers and professionals in general related to the professional field participate in our diploma course.
► Access the database of the queries and responses of the participants, as well as the technical reports generated in each module and the thesis projects.
• Module 2: RocData Software
[Rock mass, soil and discontinuity strength analysis]
• Module 3: Dips Software
[Interactive orientation analysis based on geological data]
• Module 4: Phase2 Software
[Finite element analysis for excavations and slopes]
• Module 5: Support design for tunnels and/or mining excavations
[Phase2 and RocSupport software workshop]
• Module 6: Geomechanical design in underground excavations and tunnels
[Phase2 software workshop]
• Module 7: Slope stability in soil and rock
[Slide, Dips, RocPlane and Swedge software workshop]
•Module 8: Thesis project
[Elaboration of the supporting thesis of the diploma]
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous). At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
Professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require greater knowledge of it. Likewise, professionals from mining contractor companies, infrastructure, consultants, university professors and students and the general public that is involved in the subject.
7 months. 185 academic hours are accredited.
The Diploma is available at all times. The start date of the same will be based on your availability of time.
“The importance of gradually acquiring knowledge in professional development has made me worry about training myself on the topics covered by this course, finding the topic of tunnels and embankments very interesting, I allow myself to suggest and recommend to the professional community, that they access the knowledge proposed in this diploma“
Víctor Hugo, Yépez Moreira
Civil Engineering - Analyst
Municipio del Cantón Riobamba
Ecuador
“The course is excellent, mastery of the subject, the teacher has an extraordinary handling. Very good, well detailed and updated“
Francisco, Benavente Monastirsky
Mining – Shift Manager
LGP
Chile
“The course is very good, in general many of the essential topics related to the geomechanical classification of rocks, wedge determination, application of the Unwedge program and determination of preliminary support for tunnels are covered. The teacher has an incredible mastery of the exposed matter, I learned a lot“
Gabriel Enrique, Calvo Vargas
Geotechnics – Geotechnical Engineer
IMNSA Ingenieros Consultores S.A.
Costa Rica
“Despite being virtual classes, I can testify that the teacher reaches the student, it is didactic. I thought it was good that they are demanding in the review and presentation of the course. The data and information provided helped me a lot to manage the softwares and the constant support of the Center is a plus that few Institutions have“
Karina, Barreda Barriga
Studies Management Unit - Geologist
Inter-American Development Bank
Peru
To serve you correctly, we handle different quotes that are based on the different needs of our clients.
We have implemented an automated system that will take care of it. We would appreciate it if you register and the system will automatically send you the email you register:
► Brochure of the diploma (modality, duration, curriculum, others)
NOTE: This registration will not generate any commitment with our institution, the objective is to be able to send you the information of the graduate.
Survey of 100% enrolled students based on a scale of 1 to 5.
It is recommended that the student have:
• Basic knowledge in Geomechanics and Rock Mechanics .
• Experience in the area of Geomechanics or Geotechnics.
• Internet access with a minimun speed of 1Mb.
NOTE: It is not mandatory for the students to have a professional career.
In order to enroll in our courses, write to the following email: information@centrogeotecnico.com
For consultations contact the following telephones:
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 933 740 231
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
CGI INTERNACIONAL: Mobile-Whatsapp (+51) 933 740 231
We can also assist you online through our chat (see in lower right corner).
1. When does the Diploma start?
Answer:
The diploma does not have a start date, since it is developed in the virtual offline mode. You can start at any time, depending on your time availability. Likewise, the development of the diploma is individual, it is not required that there be a number of participants for the diploma to start.
2. Is there a specific start date or can I access it whenever I want, once the amounts have been paid?
Answer:
You can start the diploma course immediately, if you request it. The activation of the same is carried out in a time not exceeding two business days.
3. I see that in the diploma course you use some softwares. Do you facilitate the softwares? If I don't have any software, Phase2 for example, do you provide any facility to get them?
Answer:
We do not grant the software that will be used in the workshops because it is copyrighted by the Rocscience firm. We have a module on the virtual campus which will give you access to request a temporary license from the firm Rocscience. Rocscience on average takes 24 hours to send you the download links and you will be able to use it for about 15 days. The programs with a temporary license are complete and there are no limitations in their functions and they allow you to record the cases that you develop in them.
4. If one of the softwares is new to me, in the content of the diploma do you teach its management?
Answer:
Yes. Software is applied in all Diploma modules. It starts at the basic level and progresses to advanced levels. There is the possibility of developing cases raised by students.
5.- Is the modality that you apply 100% virtual? In my case, I am in Costa Rica.
Answer:
Yes, it will be developed on a virtual platform from which the teacher and students will connect to the class, only with a computer and the Internet you will be able to participate. The diploma is available in all countries.
6.- I have taken virtual courses and diplomas in other institutions and I have bad experiences (my questions were never answered, I did not have the support of the tutor, I had problems accessing the virtual campus, among others). Why should you trust the International Geotechnical Center?
Answer:
We are sorry for the bad experience you had. One of the pillars of success of our institution is that it is directed by specialists in Geomechanics and Geotechnics (and this is vital to differentiate ourselves from the competition). The aforementioned guarantees us to know our clients and their needs (specialized curriculum, atypical work rhythm, remote location in some cases, others). This is why the International Geotechnical Center has developed training programs that meet the needs of professionals. The hundreds of clients who have trusted us attest to this.
7.- I am a technician with experience in Geomechanics. Can I participate in the diploma course?
Answer:
Yes. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field can participate in the diploma.
8. I reside in Argentina. I would like to know if the certificates and diploma of the diploma are valid in my country.
Answer:
Our diploma course does not grant you a degree unlike a professional career or another. Its objective is to specialize in Geomechanics and Geotechnics. If required by the employer or other institution, to verify that you have taken a course, program or diploma with us, we have a verification system. Each certificate and diploma has a unique identification code.
9. Do you indicate in the certificate the virtual modality and who certifies?
Answer:
The certificates do not indicate the virtual modality of the diploma. Certificates and diplomas are issued by the International Geotechnical Center.
10. Are there discounts for registering multiple people? We are three engineers from a company in Colombia.
Answer:
We do have discounts. You can check our special group prices.
11. I am currently unemployed. Are there special prices for these cases?
Answer:
CGI's policy is always to support all of our clients. We have cash and parts payment facilities. Contact us at: information@centrogeotecnico.com
12. I have never been trained virtually. Will it be difficult to train?
Answer:
It is not difficult to train. The platform to be used is very intuitive and easy to use, in addition, you will have an advisor who will guide you in case your access is complicated.
INFORMATION AND QUERIES:
We can attend to your queries regarding our Diploma course.
Please provide us with some information so a representative can reach you