Training modality
- 100% virtual offline modality (asynchronous, without class schedules, access 24 hours a day, all year round)
Duration
7 months
280 academic hours
Start date
Activations available from November 15, 2024
AVAILABLE IN ALL COUNTRIES
► Receive the certificates and diploma in the name of the International Geotechnical Center.
► Receive training from a speaker with extensive experience in the field.
► Receive materials for each module, such as slides, manuals, and data that you can keep.
► Access to view the class videos for the modules through the CGI Virtual Campus.
► Ability to make necessary academic inquiries through the CGI Virtual Campus forum.
► Access the modules from wherever you are through your computer and the Internet.
► You will have a privileged view of the classes compared to an in-person diploma program.
► Module 2: Hydrology and hydrogeology in slope stability and types of failure
* Groundwater
* Types of failure in slopes
* Kinematic analysis
► Module 3: Stability analysis of rock slopes
* Kinematic analysis: Flat, rotational, overturning and wedge failure analysis
* Application of Dips, RocPlane, Swedge and RocTopple software
► Module 4: Seismic behavior of slopes
* Analysis of seismic stability
* Numerical analysis
* Effects of blasting
* Instrumentation, stabilization and monitoring
► Module 5: Stability analysis methods using limit equilibrium
* Mechanics of landslides
* Deterministic analysis by the graphic method
► Module 6: Tunnel Waterproofing Methods
* Stability analysis methods – graphical method, slice method
* Application of Slide2 software
► Module 7: Finite element methods for slope stability analysis
* Comparisons with stability analysis limit equilibrium
* Routine evaluation of characteristics and design of preventive measures of slip
* Application of RS2 software
► Module 8: Thesis Project
* Definition of lines of research
* Advice and support in the development of the thesis
* Review of the theses
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous). At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
Professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, rock engineering, rock mechanics, planning, geotechnics, geomechanics, geology, mining safety and professionals who require greater knowledge her.
Likewise, professionals from mining contracting companies, infrastructure, consultants, university professors and students and the general public who are involved in the topic.
7 months. 280 academic hours are accredite
Activations available from November 15, 2024
"I appreciate for the knowledge as it improves my knowledge for rock mechanics as applied in tunneling and open pits excavations. Best to acquire the knowledge regarding the rock mechanics for support and excavation in mining Works”
Thomas Joachim Lyaupe
Project geologist
Tanesco
TANZANIA
"The course was interesting and for me as a professional it can be implemented in my works. The course diploma that i had enroll right now is really added to my knowledge in mining geomechanics. The lecturer here is also very competent so what they teached us is understanable”
Arthur Gemas Pradhana Nayoan
Geologist - Exploration and Geotechnics
PT Billy Group Indonesia
INDONESIA
"I have just finished my first module of the course. I can say that this module was complet, I had a general concept of all the area involved in Rock Mechanics and could develop a basic and valuable knowledge of the principles of the Rock Mechanics. I strongly recommend this course. Excited for the next modules. I am really enjoying the course. I will probably start another course with CGI in the future”
Juliano Fabris
Geotechnical Engeneering - Geologist
Balfour Beatty
ENGLAND
“The course is entirely exciting and well added with enough required theoretical and practical study materials. It's very well developed in accordance with the demand of current need of knowledge in the tunneling industry. It was nice experience throughout the registration”
Sushant Gaurav
Balfour Beatty
Geologist - Tech Specialist - Design & Engineering
INDIA
"The diploma is a valuable and specialized educational program that equips students with the necessary skills and knowledge to pursue a career in this field. Before the end, I've been promoted from Geotechnical technician to Junior geotechnical engineer, as I started demonstrating a better understanding of Geotechnical concepts and applications in underground mine. The recommendations and observations provided earlier can help enhance the learning experience for students and further improve the effectiveness of the diploma program. I strongly recommend this diploma to those wanted to acquire knowledge in geotechnics. Congratulations to the staff and thank you for the support”
Zoubga Patindsongré Ahmed Jaber
Geotechnical Technician
Endeavour Mining - Mana Mine
BURKINA FASO
To serve you correctly, we handle different quotes that are based on the different needs of our clients.
We have implemented an automated system that will take care of it. We would appreciate it if you register and the system will automatically send you the email you register:
► Brochure of the diploma (modality, duration, curriculum, others)
NOTE: This registration will not generate any commitment with our institution, the objective is to be able to send you the information of the graduate.
Survey of 100% enrolled students based on a scale of 1 to 5.
It is recommended that the registrant must have the following:
• Basic knowledge of classical mechanical physics, plane geometry, geology, rock mechanics and soil
mechanics
• Personal computer
• Good internet connection (recommended)
In order to enroll in our courses, write to the following email: information@centrogeotecnico.com
For consultations contact the following telephones:
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 933 740 231
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
CGI INTERNACIONAL: Mobile-Whatsapp (+51) 933 740 231
We can also assist you online through our chat (see in lower right corner).
1. When does the Diploma start?
Answer:
The diploma does not have a start date, since it is developed in the virtual offline mode. You can start at any time, depending on your time availability. Likewise, the development of the diploma is individual, it is not required that there be a number of participants for the diploma to start.
2. Is there a specific start date or can I access it whenever I want, once the amounts have been paid?
Answer:
You can start the diploma course immediately, if you request it. The activation of the same is carried out in a time not exceeding two business days.
3. I see that in the diploma course you use some softwares. Do you facilitate the softwares? If I don't have any software, Phase2 for example, do you provide any facility to get them?
Answer:
We do not grant the software that will be used in the workshops because it is copyrighted by the Rocscience firm. We have a module on the virtual campus which will give you access to request a temporary license from the firm Rocscience. Rocscience on average takes 24 hours to send you the download links and you will be able to use it for about 15 days. The programs with a temporary license are complete and there are no limitations in their functions and they allow you to record the cases that you develop in them.
4. If one of the softwares is new to me, in the content of the diploma do you teach its management?
Answer:
Yes. Software is applied in all Diploma modules. It starts at the basic level and progresses to advanced levels. There is the possibility of developing cases raised by students.
5.- Is the modality that you apply 100% virtual? In my case, I am in Costa Rica.
Answer:
Yes, it will be developed on a virtual platform from which the teacher and students will connect to the class, only with a computer and the Internet you will be able to participate. The diploma is available in all countries.
6.- I have taken virtual courses and diplomas in other institutions and I have bad experiences (my questions were never answered, I did not have the support of the tutor, I had problems accessing the virtual campus, among others). Why should you trust the International Geotechnical Center?
Answer:
We are sorry for the bad experience you had. One of the pillars of success of our institution is that it is directed by specialists in Geomechanics and Geotechnics (and this is vital to differentiate ourselves from the competition). The aforementioned guarantees us to know our clients and their needs (specialized curriculum, atypical work rhythm, remote location in some cases, others). This is why the International Geotechnical Center has developed training programs that meet the needs of professionals. The hundreds of clients who have trusted us attest to this.
7.- I am a technician with experience in Geomechanics. Can I participate in the diploma course?
Answer:
Yes. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field can participate in the diploma.
8. I reside in Argentina. I would like to know if the certificates and diploma of the diploma are valid in my country.
Answer:
Our diploma course does not grant you a degree unlike a professional career or another. Its objective is to specialize in Geomechanics and Geotechnics. If required by the employer or other institution, to verify that you have taken a course, program or diploma with us, we have a verification system. Each certificate and diploma has a unique identification code.
9. Do you indicate in the certificate the virtual modality and who certifies?
Answer:
The certificates do not indicate the virtual modality of the diploma. Certificates and diplomas are issued by the International Geotechnical Center.
10. Are there discounts for registering multiple people? We are three engineers from a company in Colombia.
Answer:
We do have discounts. You can check our special group prices.
11. I am currently unemployed. Are there special prices for these cases?
Answer:
CGI's policy is always to support all of our clients. We have cash and parts payment facilities. Contact us at: information@centrogeotecnico.com
12. I have never been trained virtually. Will it be difficult to train?
Answer:
It is not difficult to train. The platform to be used is very intuitive and easy to use, in addition, you will have an advisor who will guide you in case your access is complicated.
INFORMATION AND QUERIES:
We can attend to your queries regarding our Diploma course.
Please provide us with some information so a representative can reach you